Shanghai Sunland Industrial Co., Ltd is the top manufacturer of Personal Protect Equipment in China, with 20 years’experience. We are the Chinese government appointed manufacturer for government power,personal protection equipment , medical instruments,construction industry, etc. All the products get the CE, ANSI and related Industry Certificates. All our safety helmets use the top-quality raw material without any recycling material.
Helmeted motorcyclists drive faster
We provide exclusive customization of the products logo, using advanced printing technology and technology, not suitable for fading, solid and firm, scratch-proof and anti-smashing, and suitable for various scenes such as construction, mining, warehouse, inspection, etc. Our goal is to satisfy your needs. Demand, do your best.
Professional team work and production line which can make nice quality in short time.
The professional team provides 24 * 7 after-sales service for you, which can help you solve any problems
All protective ,helmets, in accordance with this standard shall meet either ,Type, I or ,Type, II impact requirements. In addition, all ,helmets, are further classified as meeting ,Class, G, ,Class E,, or ,Class, C electrical requirements. Impact Types. ,Type, I: ,Helmets, intended to reduce the force of impact resulting from a blow only to the top of the head.
Note: The slots of these ,helmets, have been changed as of March 2014 to fit 3M/Peltor and Helberg cap mounted hearing protection. Available in eight colors: White, Yellow, Orange, Dark Green, Light Blue, Gray, Black, Red; CSA certified ,Type 1 Class E,, Z94.,1,-05; Meets ANSI ,Type, I, ,Class E,, Z89.,1,-2009
Class E, Hard Hat Standards | CustomHardHats.com. ,Class E, Hard Hats. ,Class E, hard hats are tested to withstand 20,000 volts of electrical current and protect the user’s head from arc flashes and electrical shock. ,Class E, is the highest rating and is most effective at reducing exposure to high voltage currents.
ANSI standard that the hard hat conforms with, such as "ANSI Z89.,1,-2009" ANSI ,type, (,type, I or II) and ,class, designation (G, ,E, or C) Size range for fitting; Date of manufacture; If the hard hat meets Z89.,1,-2009, it must also contain the following as required: Two arrows curving to form a circle when the ,helmet, can be worn forwards or backwards
The ,helmet, is ,Type 1 Class E,. WARNING: improper use of this ,helmet, can cause serious or fatal injury. lf the . instructions are not followed correctly, the level of protection offered by the ,helmet, can be significantly reduced. Inspect the ,helmet, before each use far any
• ,Type, 2 for impact and penetration to the crown and laterally. Each of the two types (,1, and 2) has three separate classes, ,E,, G and C. The three separate classes identify electrical ratings: • ,Class E, has 20,000 V electric current rating • ,Class, G has a 2,200 V electric current rating
The safety ,helmet, also meets standard ,Class E helmet, requirements for ANSI Z89.,1,-2014, CSA Z94.,1,-15, ,Type 1,, ,Class E, standard. COMPACT & BREATHABLE DESIGN A smaller, low-profile brim improves the wearer’s field of vision—particularly when looking up.
Safety ,helmets, & hard hats for construction or mine industries. librerty, Ergodyne, Fibre Metal, liberty. All CSA approved. A wide selection of ,Type 1, or 2 ,helmets,, & ,Class E, or G. Available for purchase online on Sylprotec.com
This ,helmet, meets the CSA Z94.,1,-15, ,type 1,, ,class E, standard requirements. Sold individually, 20 units per case. MSA® manufacturer’s code: 475358 (white) This safety ,helmet, is available in many colors: those in stock at the manufacturers are white, yellow, and blue.
21/6/2017, · Industrial protective ,helmets, are classified by impact ,type, and electrical ,class, per ANSI Z89.,1,-2014*. All protective ,helmets, are required to meet either ,Type, I or ,Type, II requirements. If hazard potential is for top impact, a ,Type, I ,helmet, should be considered. If hazards are present that can impact the front, back and sides, as well as the top of a ,helmet,, use of a ,Type, II ,helmet, should be ...
ANSI/ISEA Z89.,1,-2014 Industrial Head Protection This standard provides performance and testing requirements for industrial ,helmets,, commonly known as hard hats. It establishes the types and classes of protective ,helmets,, depending on the ,type, of hazard encountered. It includes specifications for ,helmets, designed to offer protection from lateral impact, or top-only impact, giving employers and ...