Shanghai Sunland Industrial Co., Ltd is the top manufacturer of Personal Protect Equipment in China, with 20 years’experience. We are the Chinese government appointed manufacturer for government power,personal protection equipment , medical instruments,construction industry, etc. All the products get the CE, ANSI and related Industry Certificates. All our safety helmets use the top-quality raw material without any recycling material.
Specification for wearing safety helmet in construction
We provide exclusive customization of the products logo, using advanced printing technology and technology, not suitable for fading, solid and firm, scratch-proof and anti-smashing, and suitable for various scenes such as construction, mining, warehouse, inspection, etc. Our goal is to satisfy your needs. Demand, do your best.
Professional team work and production line which can make nice quality in short time.
The professional team provides 24 * 7 after-sales service for you, which can help you solve any problems
The moving parts within your suspension & steering system can move around under compression. This is more likely to happen when you hit a pothole or a ,bump, at speed, and judging by the current state of the UK roads - is a common occurrence.
27/10/2015, · My shock mounts are 20 5/8" apart, and the ,bump stops, has 4 3/4 - 5" gap WITH 2" extensions. I'm running shocks with 15" collapsed length and have about 3/4" of shaft left at full ,bump,. In the future when I get a front driveshaft I will go to the longer shock which is 1.4" longer when collapsed. I'll need another inch of ,bump, up front at that time.
Pair ,bump stops, with dust ,caps, d 20-22mm. For piston rod diameter 20mm to 22mm. Length ,stop, buffer 85 mm : Pair ,bump stops, with dust ,caps, d 16mm. Shock absorber maintenance: online price: € 15.57 excl VAT . ADD TO BASKET. Pair ,bump stops, with dust ,caps, d 16mm.
14/1/2018, · 8. Grip the old ,bump stop, and twist to remove it from the top mount, and pull the other end of the ,bump stop, out of the plastic sleeve. Mine broke up so I had to prise the lower part out with a screwdriver. 9. Using a smear of washing up liquid as lubricant, push the new ,bump stop, into place in the top mount and sleeve. 10.
A ,Bump Stop, does exactly what you think it does, ,stops, the ,bump,. Well, it's a little more detailed than that. The functions of a ,bump stop, are to limit suspension travel so that tires don't rub on the body, to prevent the vehicle from bottoming out, and to prevent the over-compression of springs.
15/6/2007, · Apprently, the ,bump stops, are often loose from birth! Once back in place, all is deemed to be well (even if the noises do not go away!!!). Anyway, here's a good one, on the rear springs, they can often be fitted 180 degrees wrong and the top of the spring does therefore not …
29/12/2016, · Measure the distance to where the ,bump stop, would be fully compressed. If your shock shaft length is greater than the ,bump, distance than your ok. Jack up the rear of the truck till rear tires are off the ground.Set on jack stands.See if your shocks are fully extended(you could put a jack.between the frame and the leaf pack to be sure the springs are fully extended).
A ,bump cap, provides effective protection against bumps and scrapes, but is a lightweight option that is comfortable to wear, even for long periods of time. As well as being lightweight, ,bump caps, provide ventilation to the head , allowing the wearer to remain at a comfortable temperature.